Yealink SIP T46G Administrator's Manual page 124

To configure an intercom key via web user interface:
1. Click on DSSKey->Line Key.
2. In the desired DSS key field, select Intercom from the pull-down list of Type.
3. Enter the remote extension number in the Value field.
4. Select the desired line from the pull-down list of Line.
5. Click Confirm to accept the change.
To configure an intercom key via phone user interface:
1. Press Menu->Call Feature->DSS Keys.
2. Select the desired DSS key.
3. Press or
4. Select the desired line from the Account ID field.
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. Enter the remote extension number in the Value field.
7. Press the Save soft key to accept the change.
The way IP phones handle incoming intercom calls depends on the incoming intercom
call configurations. The following describes each configuration parameter for incoming
intercom calls.
Phone User Interface
, or the Switch soft key to select Intercom from the Type field.
Configuring Basic Features
http://<phoneIPAddress>/servlet
?p=dsskey&model=1&q=load&li
nepage=1
Assign an intercom key.
111