Troubleshooting; Viewing Log Files - Yealink SIP T46G Administrator's Manual

This chapter provides an administrator with general information for troubleshooting
some common problems that may encounter while using the SIP-T46G IP phone.
The IP phone can provide feedback in a variety of forms such as log files, packets, status
indicators and so on, which helps an administrator quickly find out the reasons for the
failure and do the troubleshooting more easily.
The following are some methods for you to learn more about the working status of your
IP phone and quickly find out the reasons for the failure.

Viewing Log Files


Capturing Packets

Enabling the Watch Dog Feature

Getting Information from Status Indicators

Analyzing Configuration Files

The IP phone can log various events to log files. So if your IP phone encounters some
problems, commonly the log files are used. You can export the log files to a syslog
server or the local system. You can specify the location for which to save log files for
troubleshooting purposes using the configuration files or the web user interface. You can
also set the system log level to specify the severity level of the logs to be reported to a
log file. The system log level is 6 by default.
In the configuration files, you can use the following parameters to configure log settings:
syslog.server -- Specify the IP address of the syslog server where to export the log

files.
syslog.log_level -- Specify the severity level of the logs to be reported to a log file

(Changes to this parameter via web user interface require a reboot).
For more information on the log setting configuration parameters, refer to
on page 350.
To configure the level of the log files via web user interface:
1. Click on Settings->Configuration.

Troubleshooting

Log Settings
217