Configuring The Ws 2000 Wireless Switch; Getting Started With The Ws 2000 Wireless Switch - Symbol WS 2000 System Installation Manual

Hide thumbs Also See for WS 2000:

Table of Contents

This section provides just enough instruction to set up the WS 2000 Wireless Switch, connect

an Access Port, and test communications with a single mobile unit and the wide area network

(WAN). The configuration suggestions made here are just the minimum needed to test the

hardware. It is assumed that the switch and the Access Port are already installed using the

instructions found earlier in this guide. Once finished with this section, additional configuration

settings are required. This section covers the following topics:

• Setting up administrative communication

with the switch

• Setting the basic switch settings

• Enabling Subnet1

• Configuring Subnet1

WS 2000 Wireless Switch

Configuring the

• Configuring the WAN interface

• Enabling wireless LANs (WLANs)

• Configuring WLAN security

• Testing connectivity

Table of Contents