Configuring The Kdc Slave; Configuring The Master Kdc To Recognize The Slave - Symbol WS5000 series Reference Manual

4-4
WS5000 Series Switch System Reference Guide
Setting slave KDC information is a two step process:, as described in the following sections:
•

Configuring the KDC Slave

•

Configuring the Master KDC to Recognize the Slave

4.2.2.1 Configuring the KDC Slave
IMPORTANT! BEFORE ADDING A SLAVE KDC, A MASTER KDC MUST ALREADY BE
!
CONFIGURED.
To configure a KDC as a slave KDC, follow these steps:
1. From the WS5000 Series Switch GUI main window, click System Settings > Kerberos >
Configuration > KDC. The Kerberos Security Manager dialog box appears.
Figure 4.3 Kerberos Security Manager—Configuring a Slave KDC
2. Enter the Hostname, IP Address, and Domain for Kerberos authentication.
3. Select New Slave in the left panel, and configure the slave KDC server details, such as Hostname, IP
address, and Domain.
4. When done, click Add to set the slave KDC information.
5. Continue with the steps described in
4.2.2.2 Configuring the Master KDC to Recognize the Slave
To configure the master KDC to recognize the slave KDC, follow these steps:
1. Complete the steps described in
1. From the WS5000 Series Switch GUI main window, click System Settings > Kerberos >
Configuration > Slave.
2. Select the slave KDC from the list in the the left pane, then enter the hostname, IP address, and
domain of the master KDC server.
Configuring the Master KDC to Recognize the
Configuring the KDC Slave.
Slave.