Installing The Branch Office Wireless Switch Solution; The Installation Process - Symbol WS 2000 Quick Installation Manual

3.1 The Installation Process

The WS 2000 Wireless Switch can operate in various locations, allowing placement in most
environments. The basic installation steps are:
1. Select a site (desk, wall, or rack) for installation of the wireless switch.
2. Install the switch in the selected location using the instructions specifically for that
location type, found in
Connect the wireless switch to the power supply early in the
installation process for easy access to the connector; however, do
not plug the power supply into a power source before installation
is complete.
Installing the Branch Office
Wireless Switch Solution
Section 3.3, Installing the WS 2000 Wireless
3
Switch.