3.1 The Installation Process
The Symbol Branch Office Wireless Switch Solution can operate in various locations, allowing
placement in most environments. The basic installation steps are:
1. Select a site (desk, wall, or rack) for installation of the wireless switch.
2. Install the switch in selected location using the instructions specifically for that location
type, found in
Connect the wireless switch to the power supply early in the installation
process for easy access to the connector; however, do not plug the power
supply into a power source before installation is complete.
Installing the Branch Office
Wireless System Solution
Section 3.3, Installing the WS 2000 Wireless
3
Switch.