Configuring Clients - Symbol WS5000 Series System Reference Manual

5-8
WS5000 Series Switch System Reference Guide
Base DN
Pass Attribute
Login Attribute
Filter
Password
Group Name
Membership
Attribute
2. Click one of the following buttons in the screen:
Apply
Undo
Cancel
Help

5.2.4 Configuring Clients

To configure the WS 5000 Radius client so that it can be accessed by external Radius servers:
1. Click the Clients Configuration
Specify a distinguished name that establishes the base object
for the search. The base object is the point in the LDAP tree at
which to start searching.
Enter the password attribute used by the LDAP server for
authentication.
Enter the login attribute used by the LDAP server for
authentication. In most cases, the default value in this field
should work.
Specify the filters used by the LDAP server.
Enter a valid password for the LDAP server.
Specify the name of the group sent to the LDAP server.
Specify the Group Member Attribute to be sent to the LDAP
server when authenticating users.
Saves your changes
Closes the screen without saving your changes. This reverts
the screen back to the last saved configuration.
Exits the applet and terminate this session
Displays the online help.
tab in the Radius Configuration screen.