Table of Contents
Advertisement
Timer operations
Be sure to adjust the present time before proceeding to
the following.
@ Timer playback of tape
1 Switch the power ON.
Press the
key
of the amplifier.
'ON/STAN
2 Select the program setting mode.
PROGRAM
@ The program No. indicators (1 to 6) blink.
3 Select the program No. to be used.
Select from 1 to 6.
'SUN
@MON
37TUE
awed
BTM
SER
7GaT
ee
am
@ The selected program No. indicator blinks.
4 Specify the day(s) of the week with the
numeric keys.
VBUN
B/MON
STUE
aweo
6TH
FSSA
@ See page 69.
5 Input the ON time with the numeric keys.
22:45PM :(2],[2], [4], [5]
VSBUN
2@MON
_STWE
WED
STH
FRI
SAT
Tn
6 Input the OFF time with the numeric keys.
V/SUN
_2/M0N
SUE
AED
TH
FF
GAT
Tn
Notes:
Press within 10 seconds.
7 select the PLAY mode.
The timer modes are switched between PLAY and REC every time the
BAND key is pressed.
Select the TAPE source.
BAND
i
ee —» [TAPE]
—» TUNER —> ST]
The sources are switched every time the BAND key is pressed.
9 Insert a tape and determine the playback
condition.
Select the side(s) to be played (DIRECTION key) and the
Dolby NR mode (Dolby NR key).
@ Timer playback is possible with either Deck A or Deck
B.
However,
if tapes are placed in both decks, playback will
begin from Deck A.
1 0 Activate the execution of the program.
® Press the
key.
=
® Select the program No. to be executed by pressing the
numeric key under which it is set.
1SUN
_2/VON
_STUE
awED
THU
FAL
AT.
EE
|
||
ER
|
|
@ The selected program No. indicator lights up.
1 1 Adjust the volume and tone.
1 2 Switch the power OFF.
Press the [POWER | key
of the amplifier.
1. Ifyou commit a mistake in the timer programming, press the
key and re-start from the beginning.
2. Ifit is required to modify a program which has already been set, set a new program from the beginning.
3. When a program has
previously been set in the program No. selected in step 3, the newly-set program replaces the previous program.
4. Do not operate the |CLEAR|
key or | POWER | key while the time program execution has been activated; otherwise malfunction will oc-
cur.
72 > M-97/97M(En)
Advertisement
Table of Contents
