Comfort Controls - Winnebago 2004 Ultimate Freedom Owner's Manual

COMFORT CONTROLS

AUTO AIR CONDITIONER/
HEATER
Controls for the air conditioner, heater, de-
froster and vent are all combined into one control
panel. Refer to the following instructions for use
of individual controls.
Fan Switch
Control
Driver Side Controls
Passenger Side Controls
HEATING
A. For maximum heating
1. Turn the mode selection knob to HEAT
or VENT.
2. Turn the temperature control knob to
WARM (red) zone.
3. Place the fan switch to high (largest dot).
B. For reduced heating:
1. Turn the temperature control knob to a
medium position for desired comfort.
Temp Mode
Control
DRIVING YOUR MOTOR HOME
2. Adjust the fan speed for desired volume.
DEFROSTING
A. For maximum defrosting and defogging:
1. Turn the mode control knob to DEF.
2. Turn the temperature control knob to
WARM (red).
3. Turn the fan switch to high (largest dot).
4. Turn on auxiliary (windshield) fans if
additional air movement is needed
B. For reduced defrosting:
1. Turn the temperature control knob to the
left to an intermediate setting.
2. Adjust the fan speed for desired volume.
VENTILATION
A. To vent outside air into the vehicle when nei-
ther heating or cooling is required.
1. Turn the mode selection knob to vent.
2. Turn the temperature control knob all the
way to the left to the COOL (blue) zone.
3. Adjust the fan speed for desired volume.
AIR CONDITIONING
A. For maximum cooling.
1. Turn the mode selection knob to MAX
A/C.
2. Turn the temperature control knob all the
way left to the COOL (blue) position.
3. Turn the fan speed switch in to high
(largest dot).
OFF
When no heating, cooling or defrosting are
required:
1. Turn the mode selection knob to OFF. This
will shut off the fan and prevent outside air
from entering the unit.
SECTION 2
2-21