Table of Contents
Advertisement
Video Selector
Components
Each component has a set of buttons that lets
you select which source you want to get the pic-
ture signal from, whether cable TV, roof antenna,
digital satellite dish, VCR or whatever equipment
you have connected to the AUX input. You will
notice the VCR button group has no VCR button.
That's because it wouldn't work for the VCR to
get a picture signal from itself.
There are three component groups:
•
FRONT TV
•
DVD Player (in front Video Center)
•
VCR (in Video Center)
•
TV2 (in Bedroom or Rear of Coach)
Selections (Signal Input):
Each button in a component group lets you
select the source you want to draw the picture
signal from, such as cable TV, VCR, the roof
antenna, or satellite dish antenna. Press the cor-
responding button to connect to the desired sig-
nal source.
•
AUX = Press to connect to a video compo-
nent which you may have installed later,
such as a Digital VideoDisc (DVD) player.
•
SAT = Press to connect to the Digital Satel-
lite System (dish antenna).
•
ANT = Connects to the roof antenna.
•
VCR = Connects selected TV to the VCR or
DVD.
APPLIANCES & INTERIOR FEATURES
•
CABLE = Connects to a local cable TV sys-
tem hookup if you have connected one to
your coach.
DELUXE AUDIO-VIDEO SURROUND
SOUND SYSTEM WITH SONY VCR, VEGA
PLASMA TV AND DREAM SYSTEM DVD
Basic Instructions for Watching DVD or VCR
•
Connect shoreline or start generator so 110-
volt AC is available (or press 'Invert' button
on inverter panel)
•
Be sure speaker switch on dash is in TV
position for surround sound.
•
Turn TV On
•
Turn DVD player On
•
Press TV/VIDEO button (on Remote or TV
front panel) and select 'Video 1'. The fol-
lowing screen will appear for DVD viewing.
•
Press the WIDE MODE button to select the
screen size desired.
•
(Default picture aspect is set to 4:3 - Select
16:9 for high definition viewing)
SECTION 8
8-19
Advertisement
Table of Contents
