100/1000Base-X Sfp Port Led; Sfp+ Port Led - H3C S5500-HI Switch Series Installation Manual

100/1000Base-X SFP port LED

Each 100/1000Base-X SFP port has a status LED to show port operating status and activities. The port
mode LED indicates the type of information (for example, port rate or duplex mode) that the port LEDs are
showing. You can use the port LED mode switching button to change the type of displayed port
information.
Table 24 100/1000Base-X SFP port LED description
Port mode LED (Mode)
status
Steady green (rate mode)
or flashing green ( 1 Hz,
PoE mode)
Steady yellow (duplex
mode)

SFP+ port LED

Each SFP+ port has a status LED to show port operating status and activities. The port mode LED indicates
the type of information (for example, port rate or duplex mode) that the port LEDs are showing. You can
use the port LED mode switching button to change the type of displayed port information.
Table 25 SFP+ port LED description
Port mode LED
(Mode) status
Steady green (rate
mode) or flashing
green ( 1 Hz, PoE
mode)
Steady yellow (duplex
mode)
Port LED status
Steady green
Steady yellow
Flashing yellow (3 Hz)
Off
Steady green
Flashing yellow (3 Hz)
Off
SFP+ port LED status
Steady green
Steady yellow
Flashing yellow (3 Hz)
Off
Steady green
Flashing yellow (3 Hz)
Off
78
Description
The port is operating at 1000 Mbps. The port LED fast
flashes when the port is sending or receiving data.
The port is operating at 100 Mbps. The port LED fast
flashes when the port is sending or receiving data.
POST has failed on the port.
No link is present on the port.
The port is operating in full duplex mode. The port LED
fast flashes when the port is sending or receiving data.
POST has failed on the port.
No link is present on the port.
Description
The port is operating at 10 Gbps. The port LED fast
flashes when the port is sending or receiving data.
The port is operating at 1 Gbps. The port LED fast
flashes when the port is sending or receiving data.
POST has failed on the port.
No link is present on the port.
The port is operating in full duplex mode. The port LED
fast flashes when the port is sending or receiving data.
POST has failed on the port.
No link is present on the port.