Figure 27 Connecting the grounding cable to a grounding strip
(1) Grounding post
(3) Grounding cable
Connecting the side grounding point to a grounding strip
This method is applicable to only the S5500-28SC-HI and S5500-52SC-HI switches.
To connect the side grounding point to a grounding strip:
1.
Attach the two-hole grounding lug at one end of the grounding cable to a grounding point on the
switch chassis.
2.
Remove the hex nut of a grounding post on the grounding strip.
3.
Attach the ring terminal at the other end of the grounding cable to the grounding strip through the
grounding post, and fasten the ring terminal with the removed hex nut.
Figure 28 Connecting the grounding cable to a grounding strip
(1) Hex nut
(3) Grounding post
(2) Grounding strip
(4) Hex nut
(2) Ring terminal
(4) Grounding strip
21