Powering On The Switch - H3C S5500-HI Switch Series Installation Manual

Powering on the switch

Before powering on the switch, verify that the following conditions are met:
The power cord is correctly connected.
•
The input power voltage meets the requirement of the switch.
•
The console cable is correctly connected, the terminal or PC used for configuration has started, and
•
the configuration parameters have been set.
Power on the switch. During the startup process, you can access Boot ROM menus to perform tasks such
as software upgrade and file management. The Boot ROM interface and menu options differ with
software versions. For more information about Boot ROM menu options, see the software-matching
release notes for the device.
After the startup completes, you can access the CLI to configure the switch.
NOTE:
For more information about the configuration commands and CLI, see
Configuration Guides H3C S5500-HI Switch Series Command References
and
40
H3C S5500-HI Switch Series
.