Connecting The Psr150-A/Psr150-A1 - H3C S5500-HI Switch Series Installation Manual

Table 4 Power cord connection procedures at a glance
Power module
PSR150-A/PSR150-A1
PSR150-D/PSR150-D1
PSR360-56A/PSR720-56A/PSR1110-56A

Connecting the PSR150-A/PSR150-A1

The following takes the PSR150-A as an example. The connection procedure for the PSR150-A1 is similar.
To connect the PSR150-A:
1. Wear an ESD wrist strap and make sure it makes good skin contact and is well grounded.
2. Attach the hooks of the bail latch (shipped with the power module) into the two holes next to the
power receptacle on the power module, and pull the bail latch leftwards (see
3. Connect one end of the AC power cord supplied with the power module to the power receptacle
(see callout 1 in
4. Pull the bail latch rightwards to secure the plug to the power receptacle (see callout 2 in
5. Connect the other end of the power cord to an AC power outlet.
Figure 41 Connecting the PSR150-A (1)
Figure 42 Connecting the PSR150-A (2)
Connection procedure reference
Connecting the PSR150-A/PSR150-A1
Connecting the PSR150-D/PSR150-D1
Connecting the PSR360-56A/PSR720-56A/PSR1110-56A
Figure 42).
30
Figure 41).
Figure 42).