Interface Cards; Sfp/Sfp+/Xfp Transceiver Modules And Sfp+/Cx4 Cables - H3C S5500-HI Switch Series Installation Manual

Interface cards

Card model
LSPM2GP2P
LSPM2SP2P
LSPM1CX2P
LSPM1XP2P
LSPM1XP1P
LSP5GP8P0
LSP5GT8P
LSPM1XGT2
P
NOTE:
The LSP5GT8P interface card adds 34.75 mm (1.37 in) to the depth of the switch.
•
The LSP5GP8P0 interface card adds 69.75 mm (2.75 in) to the depth of the switch.
•
• For more information about the interface cards, see their user manuals.
SFP/SFP+/XFP transceiver modules and SFP+/CX4
cables
This section describes the transceiver modules and transceiver module cables available for the H3C
S5500-HI Switch Series.
IMPORTANT:
The operating temperature is 0°C to 45°C (32°F to 113°F) for the XFP-LH40-SM1550-F1 and
XFP-LH80-SM1550 transceiver modules, and 0°C to 50°C (32°F to 122°F) for all other transceiver
modules.
To guarantee the functionality of the transceiver module ports, use only H3C transceiver modules.
The transceiver modules available for this switch series are subject to change over time. For the most
up-to-date list of transceiver modules, consult your H3C sales representative or technical support
engineer.
For the transceiver module specifications, see H3C Low End Series Ethernet Switches Pluggable Modules
Manual. For information about installing or removing a transceiver module, see H3C Pluggable
SFP[SFP+][XFP] Transceiver Modules Installation Guide.
Port type and quantity
2 × 1 Gbps SFP fiber ports
2 × 1/10 Gbps SFP+ fiber ports
2 × 10 Gbps CX4 copper ports
2 × 10 Gbps XFP fiber ports
1 × 10 Gbps XFP fiber port
8 × 100/1000Base-X SFP fiber ports
8 × 10/100/1000Base-T Ethernet
ports
2 × 1/10 GBase-T Ethernet ports
Transceiver module options
1000 Mbps SFP transceiver modules
SFP-GE-T)
•
1000 Mbps SFP transceiver modules
•
10 Gbps SFP+ transceiver modules/SFP+ cables
CX4 cables
10 Gbps XFP transceiver modules
•
1000 Mbps SFP transceiver modules
•
100 Mbps SFP transceiver modules
N/A
N/A
68
(except for