Technical Specifications - H3C S5500-HI Switch Series Installation Manual

(17) 1000Base-X SFP port
Figure 76 S5500-52SC-HI rear panel
(1) Grounding screw in the rear grounding point
(3) Fan tray slot
(5) Power module slot 2
NOTE:
The S5500-52SC-HI switch comes with an expansion interface card slot covered by a filler panel.
•
The S5500-52SC-HI switch comes with power module slots empty. You can install one or two power
•
modules for the switch as needed. In
slot 1.
The S5500-52SC-HI switch also comes with the fan tray slot empty. You must install a fan tray for the
•
switch and make sure the ventilation direction of the fan tray is suitable at the installation site. In
76, an LSPM1FAN fan tray is installed.
Figure 77 S5500-52SC-HI left side panel
(1) Side grounding point

Technical specifications

Table 9 H3C S5500-34C-HI&S5500-58C-HI&S5500-34F-HI switches technical specifications
Item
Dimensions (H × W
× D)
Weight
Management ports
Figure
S5500-34C-HI
43.6 × 440 × 360 mm
(1.72 × 17.32 × 14.17 in)
< 7.5 kg (16.53 lb)
1 console port, 1 management Ethernet port, both on the front panel
(2) Power module slot 1
(4) Expansion interface card slot
76, a PSR150-A power module is installed in power module
S5500-58C-HI
43.6 × 440 × 420 mm
(1.72 × 17.32 × 16.54 in)
< 8.5 kg (18.74 lb)
59
Figure
S5500-34F-HI
43.6 × 440 × 360 mm
(1.72 × 17.32 × 14.17 in)
< 7.5 kg (16.53 lb)