Rack-Mounting By Using Front Mounting Brackets (S5500-34C-Hi, S5500-58C-Hi, And S5500-34F-Hi) - H3C S5500-HI Switch Series Installation Manual

Figure 7 Rack mounting rail kit
(1) Chassis rail
Rack-mounting by using front mounting brackets
(S5500-34C-HI, S5500-58C-HI, and S5500-34F-HI)
This mounting method is applicable to only the S5500-34C-HI, S5500-58C-HI, and S5500-34F-HI
switches.
This task requires two people.
To install the switch in a 19-inch rack by using the front mounting brackets:
1. Identify the mounting positions.
2. Wear an ESD wrist strap and make sure it makes good skin contact and is correctly grounded.
3. Attach the front mounting brackets to the chassis:
a. Unpack the front mounting brackets and the M4 screws (supplied with the switch) for attaching
the brackets to the switch chassis.
b. Align the round holes in the wide flange of one front mounting bracket with the screw holes in
the port-side mounting position (see
c. Use M4 screws to attach the mounting bracket to the chassis.
d. Repeat the proceeding two steps to attach the other mounting bracket to the chassis.
Figure 8 Attaching the front mounting bracket to the port side
(2) Slide rail
Figure 8) or power-side mounting position (see
8
Figure 9).