Seagull Models ultra-jet Assembly Manual page 21

C/A glue.
C/A glue.
INSTALLING RECEIVER AND BATTERY.
1) Plug the five servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch also.
2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bot-
tom of fuselage using a plastic tape.
Receiver.
ATTACHMENT WING-FUSELAGE.
Attach the aluminium tube into fuselage.
www.seagullmodels.com
2
M2x6mm.
Battery.
Wing tube.
Insert two wing panels as pictures below.
Wing bolt.
BALANCING.
1) It is critical that your airplane be
balanced correctly. Improper balance will
cause your plane to lose control and crash.
THE CENTER OF GRAVITY IS LOCATED
250 MM BACK FROM THE LEADING EDGE
OF THE WING AT THE WING ROOT.
21