Download Print this page

Maintenance - AEG OF 2050 E Original Instructions Manual

Routers
Hide thumbs

Advertisement

TECHNICAL DATA
Rated input ..............................................................................
No-load speed .........................................................................
Cage stroke .............................................................................
Collet diameter max.................................................................
Collet diameter max.(UK) ........................................................
Router diameter .......................................................................
Weight .....................................................................................
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound power level (K = 3 dB(A)) ............................................
Sound pressure level (K = 3 dB(A)) .......................................
Wear ear protectors!
Total vibration values (vector sum in the three axes)
determined according to EN 60745.
Vibration emission value a
...................................................
h
Uncertainty K ........................................................................
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
brochure. Failure to follow the warnings and instructions
SAFETY INSTRUCTIONS
Exposure to noise can cause hearing
loss.
Appliances used at many different locations including open
air must be connected via a residual current operated
device (FI, RCD, PRCD).
Always wear goggles when using the machine. It is
recommended to wear gloves, sturdy non slipping shoes
and apron.
Always disconnect the plug from the socket before carrying
out any work on the machine.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine.
Always lead the cable away behind you.
Never reach into the danger area of the plane when it is
running.
Always use the protective shields on the machine.
Only use tools whose permitted speed is at least as high as
the highest no-load speed of the machine.
Sawdust and splinters must not be removed while the
machine is running.
Only use professionally grinded router cutters.
Only use router cutter with correct shank diameter.
The workpieces should be clamped down before cutting.
Put the router back to original position after usage (loosen
clamping lever to secure cage).
Only move the workpiece in counter rotation to cutter (only
work oppositely oriented)! For security, use devices such as
safety- and pressure device, guide slide, rip fence, etc.
22
ENGLISH
.......................2050 W
..........10000-20000 min
-1
...........................66 mm
...................6, 8, 12 mm
........ 1/4", 3/8", 1/2"
...........................50 mm
..........................6,2 kg
...........................96 dB (A)
.........................107 dB (A)
.............................7 m/s
2
..........................1,5 m/s
2
The dust that arises when working with this tool can be
detrimental to health (e.g. when working oak or bECh wood,
stones, paint, which could contain lead or other harmful
chemicals) and therefore not reach the body. Use a dust
absorption system and wear a suitable dust protection
mask. Remove deposited dust thoroughly, e.g. with a
vacuum cleaner.
Under the effect of extreme electromagnetic interferences
from the outside, temporary variations in the speed of
rotation could arise in particular cases.
SPECIFIED CONDITIONS OF USE
The router can be used for rabbeting, rounding off,
chamfering, routing of edges, as well as pitting in wood and
plastic.
Do not use this product in any other way as stated for
normal use.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents. EN 60745, EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3, in accordance with the
regulations 98/37/EC, 2004/108/EC
Rainer Kumpf
Winnenden, 2008-12-01
Manager Product Development
MAINS CONNECTION
Connect only to single-phase a.c. current and only to the
system voltage indicated on the rating plate. It is also
possible to connect to sockets without an earthing contact
as the design conforms to safety class II.

MAINTENANCE

The ventilation slots of the machine must be kept clear at all
times.
Use only AEG accessories and AEG spare parts. Should
components need to be replaced which have not been
described, please contact one of our AEG service agents
(see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the Article No. as well as the machine type
printed on the label and order the drawing at your local
service agents or directly at: AEG Elektrowerkzeuge,
Max-Eyth-Straße 10, D-71364 Winnenden, Germany.
SYMBOLS
Please read the instructions carefully before
starting the machine.
Always disconnect the plug from the socket
before carrying out any work on the machine.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose of electric tools together with
household waste material! In observance of
European Directive 2002/96/EC on waste
electrical and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their
life must be collected separately and returned to
an environmentally compatible recycling facility.
ENGLISH
23

Advertisement

loading

  Also See for AEG OF 2050 E