Download  Print this page

Advertisement

OMNI-MT
Original instructions

Advertisement

   Also See for AEG OMNI 12C-PB

   Summary of Contents for AEG OMNI 12C-PB

  • Page 1 OMNI-MT Original instructions...
  • Page 2 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications.
  • Page 3 The overview shows the different powerbases to this AEG application head depending on the equipment package you have purchased. Please note: Accessories not included. Other application heads can be purchased separately. OMNI 12C-PB OMNI-MT OMNI 18C-PB...
  • Page 8 Bosch/Dremel/Fein Accessories B = Bosch D = Dremel F = Fein...
  • Page 11 Noise/Vibration Information need to be replaced which have not been described, please Total vibration values (vector sum in the three axes) determined contact one of our AEG service agents (see our list of guarantee/ according to EN 60745. service addresses).
  • Page 12 www.aegpowertools.com.au Techtronic Industries GmbH Max-Eyth-Straße 10 D-71364 Winnenden Germany...

This manual also for:

Omni 18c-pbOmni-mt

Comments to this Manuals

Symbols: 0
Latest comments: