Network Installation: TCP/IP
This section covers the following topics:
•
TCP/IP
These instructions show you how to configure the following via CentreWare Internet Services:
•
TCP/IP v4 and v6
•
Domain Name
•
DNS
•
Zero Configuration Networking
The machine supports TCP/IP versions 4 and 6. IPv6 can be used instead of or in addition to IPv4.
IPv4 and IPv6 settings can be configured directly at the machine user interface, or remotely, via a web
browser using CentreWare Internet Services. To configure TCP/IP settings using CentreWare Internet
Services, refer to
Configure TCP/IP Settings using CentreWare Internet
Configure Static IPv4 Addressing at the Machine
Information Checklist
Before starting ensure that the following items are available and/or the tasks have been performed:
•
Existing operational network utilizing the TCP/IP protocol.
•
Ensure that the machine is connected to the network.
•
Static IP Address for the machine.
•
Subnet Mask Address for the machine.
•
Gateway Address for the machine.
•
Host Name for the machine.
Procedure
Enter a Static IP Address:
1.
Press the Machine Status button on the control panel.
2.
Press the up/down arrows to select Network and press OK.
3.
Enter the Administrator Password using the alphanumerical keypad. The default is 1111.
4.
Press the OK button; the Network Settings menu displays.
5.
Press the up/down arrows to select TCP/IP(IPv4); press OK.
Press the up/down arrows to select Static; press OK.
6.
7.
Press the up/down arrows to select IPv4 Address; press OK.
8.
Enter the IP Address using the alphanumerical keypad; press OK.
9.
Enter details for Subnet Mask using the alphanumerical keypad; press OK.
10. Enter details for Gateway using the alphanumerical keypad; press OK.
Network Installation: TCP/IP
Services.
Xerox® WorkCentre® 3215/3225
User Guide
37