Table of Contents
Advertisement
CentreWare
CentreWare Internet Services (Internet Services) is the embedded HTTP server application that resides
in the machine. CentreWare Internet Services allows an administrator to change network and system
settings on the machine from the convenience of their workstation.
Many features available on your machine will need to be set via the machine and CentreWare Internet
Services.
System Configuration
To use CentreWare Internet Services, you need to enable both TCP/IP and HTTP on the machine. See
Configure Static IPv4 Addressing using the Machine User
Addressing using the Machine User
To enable HTTP at the machine:
Note
HTTP is enabled by default.
1.
Press the Machine Status button.
2.
Use the up/down arrows to select Network.
3.
Use the up/down arrows to select Protocol Mgr.
4.
Use the up/down arrows to select HTTP.
5.
Select On.
6.
Press OK. The Saved screen will appear and then the Reboot Required screen will appear.
Administrator User Name and Password
Many of the features available within CentreWare Internet Services will require an Administrator user
name and password. The default user name is admin and the default password is 1111.
CentreWare Internet Services Administrator Access
To access CentreWare Internet Services Properties and change settings you will need to log in as
Administrator.
1.
At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
2.
Press Enter. The Home page appears.
There are two ways to access CentreWare Internet Services with the administrator login:
•
Select Login at the top of the screen or
•
Select the Properties icon. You are then prompted for the ID and Password.
3.
Enter the admin for the ID and 1111 for the Password.
®
Internet Services
Interface.
CentreWare® Internet Services
Interface, or
Configure Dynamic IPv4
Xerox® WorkCentre® 3215/3225
31
User Guide
- Quick Links:
- Scan to PC Setup
- Replacing Toner Cartridge
Hide quick links:
Advertisement
Table of Contents
