Power Consumption And Activation Time - Xerox WorkCentre 3215NI User Manual

Basic Regulations
ENERGY STAR
The ENERGY STAR program is a voluntary scheme to promote the development and purchase of
energy efficient models, which help to reduce environmental impact. Details on the ENERGY STAR
program and models qualified to ENERGY STAR can be found at the following Web site:
www.energystar.gov/index.cfm?fuseaction=find_a_product.showProductGroup&pgw_code=IEQ
The Xerox WorkCentre 3225 Multifunction Printer is ENERGY STAR
Program Requirements for Imaging Equipment.
The ENERGY STAR and ENERGY STAR MARK are registered United States trademarks. The ENERGY
STAR Imaging Equipment Program is a team effort between U.S., European Union, and Japanese
governments and the office equipment industry to promote energy-efficient copiers, printers, fax,
multifunction machines, personal computers, and monitors. Reducing product energy consumption
helps combat smog, acid rain, and long-term changes to the climate by decreasing the emissions that
result from generating electricity.
Xerox ENERGY STAR equipment is preset at the factory. Your printer will be delivered with the timer for
switching to Power Save Mode from the last copy/print out set at one minute. A more detailed
description of this feature can be found in the

Power Consumption and Activation Time

The amount of electricity a product consumes depends on the way the device is used. This product is
designed and configured to enable you to reduce your electricity costs. After the last print, the device
switches to Ready mode. In this mode, the device can print again immediately. If the product is not
used for a period of time, the device switches to a Power Saver mode. In these modes, to enable
reduced product power consumption, only essential functions remain active.
The product takes slightly longer to produce the first print after it exits Power Saver mode than it takes
in Ready mode. This delay is the result of the system waking up from Power Saver mode and is typical
of most imaging products on the market.
You can set a longer activation time or completely deactivate the Power Saver mode. This device can
take longer to switch to a lower energy level.
To learn more about Xerox participation in sustainability initiatives, go to:
www.xerox.com/about-xerox/environment/enus.html.
For additional information on energy or other related topics, please visit:
www.xerox.com/about-xerox/environment/enus.html. or
www.xerox.co.uk/about-xerox/environment/engb.html.
264 Xerox® WorkCentre® 3215/3225
User Guide
®
qualified under the Energy STAR
Getting Started section of this guide.