Ldap Configuration And Address Books; Ldap Configuration - Xerox WorkCentre 3215NI User Manual

12. Select OK when the acknowledgement message displays.

LDAP Configuration and Address Books

This section explains how to install and set up Address Books.
Overview
The machine supports two types of address book:
• Global
A global address book provided by Lightweight Directory Access Protocol (LDAP) services stored on
a remote server.
• Local
An address book created from a list of addresses saved in a .csv file (Comma Separated by Values)
format stored locally on the machine.
Both address book types can be configured for use on the machine at the same time.
LDAP is used to access the Corporate Address Book to locate e-mail addresses and other information
for use with many of the services.
Information Checklist
Before starting ensure that the following items are available and/or the tasks have been performed:
• Ensure your network supports LDAP services.
• Obtain the IP Address or Host Name of your LDAP Server. The machine may also need a login
name and password if the LDAP server is not configured to allow Anonymous connection.
• Use an LDAP client to validate your settings before inputting them into the CentreWare Internet
Services menus. LDAP clients include Microsoft Outlook Express, Microsoft Outlook and Lotus
Notes and other e-mail clients.
• To use host names, DNS must be configured on the machine.

LDAP Configuration

General Settings
1. At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
2. Press Enter.
3. Select Properties.
4. If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
Select Properties.
5. In the Security link on the left hand side select the Network Security link.
6. Select External Authentication.
7. Select LDAP Server.
Xerox® WorkCentre® 3215/3225
User Guide
E-mail Setup
79