Configuring VPN
Advanced Configuration of IPSec VPN
STEP 8
NOTE
NOTE
Cisco SA 500 Series Security Appliances Administration Guide
-
Username: If you chose IPSec Host as the XAUTH Type, enter the user
name for the security appliance to use when connecting to the remote
server. The username can include any alphanumeric characters.
-
Password: Enter the password for the security appliance to use when
connecting to the remote server.
Click Apply to save your settings, or click Reset to revert to the saved settings.
Next Steps
•
To review or update the configured VPN policy click IPSec > VPN Policies
in the navigation tree. For more information, see
VPN Policies, page
•
To review or update the configured IKE policy, click IPSec > IKE Policies in
the navigation tree. For more information, see
for IPSec VPN, page
•
To configure IPSec passthrough, click IPSec > Passthrough. For more
information, see
•
To configure the VPN users (for remote access VPN only), click IPSec >
IPSec Users in the navigation tree. See
for the IPSec Remote Access VPN, page
•
To configure the security appliance to work with your RADIUS server, see
Configuring RADIUS Server Records, page
Configuring the IPSec VPN Policies
You can use this page to manage the VPN policies. This page contains two tables
List of VPN Policies and List of back up Policies. These tables list the policies that
have been added and allows several operations on the policies.
Before you create an Auto Policy, first create an IKE policy. Then you can apply the
IKE policy on this page. For more information, see
IPSec VPN, page
157.
161.
157.
Configuring IPSec Passthrough, page
Configuring the IPSec
Configuring the IKE Policies
166.
Configuring the User Database
155.
208.
Configuring the IKE Policies for
8
161