Viewing The Ssl Vpn Client Portal - Cisco Small Business Pro SA 520W Administration Manual

Configuring VPN
Configuring SSL VPN for Browser-Based Remote Access
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
Cisco SA 500 Series Security Appliances Administration Guide
Click VPN on the menu bar, and then click SSL VPN Client > Configured Client
Routes in the navigation tree.
The Configured Client Routes page appears. Any configured routes are listed in
the Configured Client Routes table.
To add a configured client route, click Add.
Other options: Click the Edit button to edit an entry. To delete an entry, check the
box and then click Delete. To select all entries, check the box in the first column of
the table heading.
The SSL VPN Client Route Configuration page appears.
Enter the following information:
• Destination Network: Enter the destination subnet to which a route is added
on the SSL VPN Client.
• Subnet Mask: Enter the subnet mask for the destination network.
Click Apply to save your settings, or click Reset to revert to the saved settings.

Viewing the SSL VPN Client Portal

To view the SSL VPN Client Portal, click VPN on the menu bar, and then click SSL
VPN Client > SSL VPN Client Portal in the navigation tree.
Remote users will use the Portal URL to access the VPN portal.
The client portal provides remote access to the corporate network through the
following options in the navigation tree:
• VPN Tunnel: After the user clicks the link in the navigation tree, the VPN
Tunnel information page appears. The user can click the Launcher icon to
connect to the remote network.
• Port Forwarding: After the user clicks the link in the navigation tree, the
Port Forwarding information page appears. The user can click the Launcher
icon to connect to the remote servers.
• Change Password: The user can click this link to change his or her
password.
8
181