Cisco Small Business Pro SA 520W Administration Manual page 103

Networking
Configuring IPv6 Addressing
STEP 3
STEP 4
Cisco SA 500 Series Security Appliances Administration Guide
Other options: Click the Edit button to edit an entry. To delete an entry, check the
box and then click Delete. To select all entries in the table, check the box at the left
side of the heading row.
After you click Add or Edit, the RADVD Prefixes page appears.
Enter the following information:
• IPv6 Prefix Type: Choose whether to select the prefix type as 6to4 or
Global/Local/ISATAP. Also complete the fields that are highlighted with
white backgrounds.
• SLA ID. The SLA ID (Site-Level Aggregation Identifier) in the 6to4 address
prefix is set to the interface ID of the interface on which the advertisements
are sent.
• IPv6 Prefix: Specify the IPv6 network address.
• IPv6 Prefix Length: Enter a decimal value that indicates the number of
contiguous, higher order bits of the address that make up the network
portion of the address.
• Prefix Lifetime: Enter the maximum number of seconds that the requesting
router is allowed to use the prefix.
Click Apply to save your settings, or click Reset to revert to the saved settings.
3
103