Cisco Small Business Pro SA 520W Administration Manual page 187

Administration
Users
NOTE
STEP 1
STEP 2
STEP 3
Cisco SA 500 Series Security Appliances Administration Guide
For security, a password should contain no dictionary words from any language,
and should include a mixture of uppercase and lowercase letters, numbers, and
symbols. The password can be up to 30 characters.
Click Administration on the menu bar, and then click Users > Users in the
navigation tree. The List of Users table appears.
The Users page appears.
To add a user, click Add, or to edit a user's information, click the button in the Edit
column. The User Configuration page appears.
The Users Configuration page appears.
Enter the following information:
• User Name: Enter a unique identifier for the user. It can include any
alphanumeric characters.
• First Name: Enter the user's first name.
• Last Name: Enter the user's last name.
• User Type: Identify the type of account.
• Select Group: Choose a group.
• If you are adding a new user, complete the following fields:
- Password: Enter a password that contains alphanumeric, '—' or '_'
characters.
- Confirm Password: Enter the password again.
• If you are updating a user's settings, complete the following fields:
- Check to Edit Password: Check this box to enable the password fields.
- Enter Your Password: Enter your password, as a security check before
you can change a password.
- New Password: Enter a password that contains alphanumeric, '—' or '_'
characters.
- Confirm Password: Enter the password again.
• Idle Timeout: Enter the time in minutes that the user can be inactive before
the session is disconnected. Enter any value from 0 to 999. The timeout value
for the individual user has precedence over the timeout for the group. If you
want to ensure that the group's timeout settings are used, set this value to 0.
9
187