Networking
Configuring the LAN
STEP 1
STEP 2
Cisco SA 500 Series Security Appliances Administration Guide
•
To check the LAN connection status, click LAN > LAN Status in the
navigation tree. For more information, see
page
59.
•
To reserve certain IP addresses always to be used by particular devices,
click LAN > DHCP Reserved IPs in the navigation tree. For more
information, see
•
To view a list of the connected devices, click LAN > DHCP Leased Clients.
For more information, see
•
If you need an extra LAN port and are not planning to configure either an
optional WAN or a DMZ, click Optional Port > Optional Port Mode and
choose LAN for the port mode. For more information, see
Optional Port as a LAN Port, page
•
If you are having problems with your LAN connection, see
LAN Connectivity, page 221
Viewing the LAN Status
Click Networking on the menu bar, and then click LAN > LAN Status in the
navigation tree.
The LAN Status page appears. This page displays the following types of
information:
•
MAC address of the LAN interface
•
IP address and subnet mask of the interface
•
DHCP server mode
Click Apply to save your settings, or click Reset to revert to the saved settings.
DHCP Reserved IPs, page
DHCP Leased Clients, page
61.
in
Appendix A, "Troubleshooting."
Viewing the LAN Status,
60.
61.
Configuring the
Pinging to Test
3
59