Cisco Small Business Pro SA 520W Administration Manual page 39

Status
Device Status
Cisco SA 500 Series Security Appliances Administration Guide
• Secondary Firmware Version: The previous version of firmware that was in
use before the most recent upgrade. To switch to the secondary firmware
version, see Using the Secondary Firmware, page
• Latest Image Available: Displays the latest image available for your device.
This field is only displayed if automatic update is enabled from the
Firmware & Configuration Network page. For more information see
Upgrading Firmware and Working with Configuration Files, page
• Link to Release Notes: Provides a link to the firmware release notes on
Cisco.com.
• Time at which Last Query was made: The time when the firmware check
was last performed.
ProtectLink License Info
The status of the optional ProtectLink service, and account information, if
applicable.
LAN Info
• MAC Address: The MAC address of the security appliance on the local
network.
• IP address: The IP address for the security appliance on the local network,
with the subnet mask for the local network.
• DHCP Status: The status of the security appliance's DHCP server: enabled
or disabled. When DHCP is enabled, then the connected DHCP client
machines receive their IP addresses dynamically.
• DHCPv6 Status: The status of the security appliance's DHCPv6 server:
enabled or disabled. If DHCPv6 is enabled, then the connected DHCPv6
client machines receive their IP addresses dynamically.
Dedicated WAN Info
This section displays information about the primary (dedicated) WAN port.
• MAC Address: The MAC address of the WAN port.
• IP Address: The IP address of the WAN port.
• IP Subnet Mask: The subnet mask for the WAN port.
• NAT: The status of NAT mode for the current operation: enabled or disabled.
If NAT is disabled, then the security appliance is in routing mode.
• Wan State: The status of the WAN connection: UP or DOWN.
2
196.
192.
39