Managing User Credentials For Verisign Service - Cisco Small Business Pro SA 520W Administration Manual

Configuring VPN
VeriSign™ Identity Protection configuration
STEP 3
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SA 500 Series Security Appliances Administration Guide
In the Upload Certificate area, complete the following tasks:
a. Certificate File: Click Browse, and then find your VeriSign certificate (RA) file.
a. Password for the certificate file: Enter the password that was provided to
you along with the certificate (RA) file. The password encrypts the private key
provided in the certificate and is required to decrypt and use it.
b. Click Upload to upload the certificate.

Managing User Credentials for VeriSign Service

Use this page to associate VeriSign tokens with your users.
Your users must be configured in Administration first. See
Click VPN on the menu bar, and then click VeriSign ID Protection > Credential
Management in the navigation tree.
The VeriSign Credential Management page appears.
To add a credential, click Add.
Other options: Click the Edit button to edit an entry. To delete an entry, check the
box and then click Delete. To select all entries, check the box in the first column of
the table heading.
After you click Add or Edit, the VeriSign Credential Configuration page appears.
Enter the following information:
• Credential Id: Enter the 6-digit alphanumeric number, which is typically
found on the back of the physical token. Each credential identifier must be
unique and must not be added if it is already present in the token
configuration table.
• User Name: Choose the user to associate with the token number. Each
credential identifier can be associated with only one user. After the user has
been associated with a credential, the same user cannot be associated with
a different credential. Only available users are shown in the user list.
Click Apply to save your settings, or click Reset to revert to the saved settings.
8
Users, page 184.
183