Cisco Small Business Pro SA 520W Administration Manual page 40

Status
Device Status
Cisco SA 500 Series Security Appliances Administration Guide
• IPv4 Connection Type: The method for obtaining a public IPv4 address.
The IP address may be obtained dynamically through a DHCP server or
may be assigned statically by the user.
• IPv6 Connection Type: The method for obtaining a public IPv6 address.
The IP address may be obtained dynamically through a DHCPv6 server or
may be assigned statically by the user.
• IPv4 Connection State: Indicates if the WAN port is connected or not
through IPv4 address.
• IPv6 Connection State: Indicates if the WAN port is connected or not
through IPv6 address.
• WAN Mode: Indicates whether the WAN mode is set to single port, load
balancing or auto rollover mode.
• Gateway: The Gateway IP address of the WAN port.
• Primary DNS: The primary DNS server IP address of the WAN port.
• Secondary DNS: The secondary DNS server IP address of the WAN port.
Optional Port Info
The Optional Port Info has the following information displayed for the port that the
user assigns to be a WAN, DMZ, or LAN port:
• Present Mode: The currently configured mode: WAN, DMZ, or LAN.
• MAC Address: The MAC address of the optional port.
• IP Address: The IP address of the optional port.
• NAT: If the optional port is in WAN mode, then this field indicates if the port
is used in NAT mode (enabled) or routing mode (disabled).
• Wan State: Indicates if the WAN connection is UP or DOWN.
• IPv4 Connection Type: Indicates if the optional port WAN IP address is
obtained dynamically through a DHCP server or assigned statically by the
user.
• Connection State: Indicates if the optional port is connected or not.
• WAN Mode: Indicates whether the WAN mode is set to single port, load
balancing or auto rollover mode.
• Gateway: The Gateway IP address of the Optional port.
2
40