Ipsec Vpn Logs - Cisco Small Business Pro SA 520W Administration Manual

Status
View Logs Status
STEP 3
STEP 4
Cisco SA 500 Series Security Appliances Administration Guide
Enter the Source and Destination IP address for filtering the firewall logs.
Wildcard characters such as asterisk (*) and dot (.) are allowed in the source and
destination address fields
Click Apply to save your settings, or click Reset to revert to the saved settings.
The log information is displayed in the Log Area. It includes this information:
• Date: Date and time of corresponding log.
• Severity: Severity of corresponding log.
• Facility: Facility of corresponding log.
• Component: Component name of corresponding log.
• Source IP: Source IP address of corresponding log.
• Destination IP: Destination IP address of corresponding log.
• Log Data: Contents of each log.
Click Refresh Logs to see the entries added after the page was opened.
Click Clear Logs to delete all entries in the log window.
Click Send Logs to email the log messages that are currently displayed in
the log window. The logs are sent to the email addresses that you
configured in Remote Logging Configuration page. For more information,
see Remote Logging, page

IPSec VPN Logs

Use this page to view the log contents generated by all IPSec VPN policies. The
logs are generated automatically and need not be enabled explicitly. To open this
page, click Status on the menu bar, and then click View Logs > IPSec VPN Logs in
the navigation tree.
This shows the status of the recent IPSec VPN activity.
• Click Refresh Logs to see the entries added after the page was opened.
• Click Clear Logs to delete all entries in the log window.
203.
2
47