Preparing The Camcorder - Canon opture 10 Instruction Manual

Preparing the Camcorder
Adj'W.ing the
Viewfinder
(pigptetAdjustmeotl
Do not leave the viewfinder exposed to direct sunlight as it may melt (due to
concentration of light by the lens). Adjust the angle of the viewfinder to prevent
sunlight from entering.
•
1. Turn on the camcorder and keep the , . . - - - - - - - - - - - - - - - - - ,
LCD panel closed to adjust the
viewfinder.
2. Adjust the diopter adjustment lever.
-
~ .!:l
Attaching the
I
ens
Cap
_3
mr_mn!£GJUi£GJUltmJl1Jt_._tl!l~
_ _
,,= _
";: :a
.l!l
m
1. Attach the cord to the lens cap_
III
cu
~ ~
2. Pass the grip belt through the loop
on the cord.
Press the buttons on the lens cap when
attaching/removing it. Hook the lens cap on
the grip belt while you are recording, and
place it over the lens when you have finished.
fastening the Grip Relt
Hold the camcorder with your right
hand and adjust the belt with your left.
Adjust the grip belt so that you can reach the
zoom lever and photo button with your index
finger, and the start/stop button with your
thumb.
20