Canon opture 10 Instruction Manual page 97

Audio Dubbing
You can add sound from audio devices (AUDIO IN) or with the
built~in
or an external
microphone (MIC. IN).
•
o
Use only tapes recorded in SP mode 12-bit audio sound with this camcorder.
Audio dubbing will stop if the tape has a blank section or a section recorded in
LP mode, 16-bit or 12-bit
4~channel
sound. In above case, create a copy in SP
mode
12~bit
audio sound using the analog
line~in
function.
o
Do not connecVdisconnect any cable to/from the camcorder while dubbing.
o
You cannot use the DV terminal for audio dubbing.
o
If you add sound to a tape not recorded with this camcorder, sound quality
may decrease.
o
Sound quality may decrease when you add sound to the same scene for more
than 3 times.
CQPoertjng
ap "Idig Device
<i=='
Signal flow
STV-250N Stereo Video Cable
(supplied)
"t~
. . .
L
~
-
•
You can monitor the picture on the LCD screen or a TV connected via the
~
S-video terminal, and check the sound with the built-in speaker.
97