Canon opture 10 Instruction Manual page 294

4.
Select the network you are using, right-click the mouse button
and select [Properties].
• You can identify the network you are using by checking which [Status] is
[Enabled].
• If [1394 Connection] is listed, select a connection other than [1394
Connection]. If [Status] is not shown, select [Details] from the [View]
menu.
5.
cii~k·th;;·[Ad;;~~~~di·t~b:·;;;;;;;'~;·th;;~h;;~k;;;~~·k·-;·f;;;;;;th;·····
[Internet Connection Firewall] section and click [OK].
UfftJ Note:
• To enable the firewall after using DV Messenger, repeat steps 1 to 4 and place
the checkmark back to the checkbox.
32