Canon opture 10 Instruction Manual page 115

Playing Back a Memory Card
You can play back memory card images on the LCD screen, viewfinder screen, or on a
connected 1V screen (see Playing Back on a TV Screen
OJ
40).
You can display a single image (single image display), 6 at one time (index screen
OJ
116), or one after another (slide show
OJ
116). Use the Card Jump function to quickly
locate an image without displaying them one by one
(OJ
117).
o
Images not recorded with this camcorder, uploaded from a computer (except
the sample images
OJ
138), edited on a computer and images whose file
names have been changed may not be played back correctly.
o
Do not turn off the camcorder, disconnect the power source or remove the
memory card while the card access display
««)
in the upper right of corner of
the screen or the card access indicator is flashing. Doing so could result in data
damage.
~
0 Make sure to insert a memory card that contains images.
• 0 Only date and time will be displayed when pressing the DATA CODE button.
o
You can enlarge still images up to 5 times during playback
(OJ
83).
CARD PIlAY (VCR)
1. Set the camcorder to CARD PLAY (VCR) mode.
-
C
III
:i"
l,Q
llJ
[IJI
3. To play back a movie, press the
'-'/11
button.
The last scene appears as a still image when playback is
complete.
• The last recorded image appears.
• Movies are displayed with'the first scene as a still image indicated by "'-111".
2. Press the CARD +1- button to move between images.
Press the CARD + button to display the next image and the
CARD - button to display the previous image.
115