Canon opture 10 Instruction Manual page 136

•
Creating a Start-up Image
You can create a start-up image using a still image on the memory card or a sample
start-up image provided on the DIGITAL VIDEO SOLUTION DISK and save it as [MY
IMAGE1] or [MY IMAGE2].
a
Make sure to insert a memory card with enough remaining capacity.
a
Before you create a start-up image, you need to record a still image on the
memory card.
a
Retain the original data of the still image you have set as the start-up image on
your computer or removable disk.
~~~.~~E~~~.~.~.~
..
Record a still image on the memory card.
OR
Upload a still image from your computer to the memory card using the
software in the DIGITAL VIDEO SOLUTION DISK.
For instruction on how to upload a still image to the memory card, refer to Adding Still
Images from Your Computer to the Memory Card in the DIGITAL VIDEO SOLUTION DISK
Software Instruction Manual.
~~~~~~
..
~~.~
..
~~~~.~
..
~~~~~
..
~ ~
..
~~~.~~~p.
..
~~.~~~
.
MENU
(OJ
43)
[MY CAMERA
START-UP IMAGE
I
CARD PLAY (VCR)
1. Open the menu.
_ 2. Select [MY CAMERA].
"E 3. Select [CREATE START-UP IMAGE].
a
>.
[SET THIS AS START-UP IMAGE1?], [YES] and [NO] appears.
o
E
4. Select a still image with the CARD +/- buttons and select [YES].
C1I
~
[SAVE AS MY IMAGE11. [MY lMAGE2] and [CANCEL] appears.
III
~
5. Select [MY IMAGE1].
~
[OVERWRITE MY IMAGE1?], [YES] and [NO] appears.
6. Select [YES].
• The still image will be saved, and the image that was saved to [MY IMAGE1] is erased.
• Select this image as start-up image following the procedure in Customizing the
Camcorder
(Q] 49).
136