Canon opture 10 Instruction Manual page 306

If the camcorder connected to your computer is set to TAPE CAMERA mode, you
can send live video recording to your contact and perform a videoconference
(CO 33). You can also adjust the camcorder's zoom and focus from the DVM
panel.
1.
s;;tY;'~;~~·~~;;;d·~;t;;TAPE·CAME·RA·~;'d;~················
.
• Unload the cassette when using the camcorder in TAPE CAMERA mode.
2.
To operate your camcorder:
Click the [Local] button on the DVM panel.
To operate your contact's camcorder (when set to TAPE CAMERA mode):
Click the [Remote] button on the DVM panel.
II The [CAMERA] Operating Buttons
2
3
4 5
1
Zoom W (wide angle)
The subject becomes smaller.
2 Zoom T (telephoto)
The subject becomes bigger.
3 Focus Mode
Selects autofocus or manual focus. Click the
D
(checkbox) to change to manual focus. (Manual
focus cannot be selected if the camcorder is set
to "Easy Recording" program.)
4 Focus (Close)
Brings the focus point closer. (Cannot be used
with autofocus.)
5
Focus (Far)
Brings the focus point farther. (Cannot be used
with autofocus.)
44