Canon opture 10 Instruction Manual page 93

S-150 S-video Cable
(optional)
Converting Analog Signals into Digital
a
B
Signals (Analog-Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert
analog video/audio signals to digital signals and output the digital signals via the DV
terminal. The DV terminal serves as output terminal only.
o
Headphones cannot be used during analog-digital conversion.
o
Unload the tape from the camcorder.
o
Turn off all devices before starting the connections.
o
Depending on the signal sent from the connected device, the conversion from
analog to digital signals might not work properly (e.g., signals that include
copyright protective signals or anomalous signals such as ghost signals).
We recommend powering the camcorder from a household power source.
This illustration shows how to connect using a S-video cable. You can also connect the
yellow plug of the stereo video cable to the VIDEO terminal. Refer also to the
instruction manual of the connected device.
OUTPUT
~
Signal flow
~
!!aIC.2.:J.llIlD~
.....
_Si_gn_a_1
f_lo_w~
.....
~
STV-250N Stereo Video
Cable (supplied)
Signal flow
9
Commercially available DV cable
-
m
C.
;:;:
5'
\C
93