Canon opture 10 Instruction Manual page 152

-
152
Memory Card Operation
Problem Cause
Solution
CO
Memory card cannot be Memory card was not facing Turn the memory card over 101
inserted. the correct direction. and reinsert it.
Memory card cannot be
Memory card is full. Replace the memory card or 119
recorded.
erase images.
Memory card is not
Format the memory card. 134
formatted.
Memory card is not inserted. Insert a memory card.
101
File number reached Set [FILE NUMBERS] to
103
maximum value. [RESET] and insert a new
memory card.
SD Memory Card is Change the position of the 101
protected. protect switch.
Memory card cannot be
Camcorder is not set to Set the camcorder to CARD 115
played back. CARD PLAY (VCR) mode. PLAY (VCR) mode.
Memory card is not inserted. Insert a memory card. 101
Image cannot be erased. Image is protected. Cancel the protection.
118
SD memory card is Change the position of the
101
protected. protect switch.
CS!J
flashes red.
Card error occurred. Turn off the camcorder.
134
Remove and reinsert the
memory card. Format the
memory card if flashing
persists.