Preparing The Camcorder; Attaching The Microphone Holder Unit; Attaching The Handle Unit - Canon XF400 Instruction Manual

4k camcorder
Hide thumbs Also See for XF400:
Table of Contents

Advertisement

Preparing the Camcorder

Preparing the Camcorder
This section covers the basic preparations for the camcorder such as attaching the handle unit and lens hood,
and adjusting the viewfinder and LCD screen.
22
IMPORTANT
• Be careful not to drop the camcorder when attaching, removing or adjusting the various accessories. Using a
table or other stable surface is recommended.

Attaching the Microphone Holder Unit

Use a commercially available Phillips head ("crosshead") screwdriver
to attach the microphone holder unit to the handle unit with the two
supplied screws.

Attaching the Handle Unit

The camcorder is functional even if you remove the handle unit. However, to use the INPUT terminals (A 79),
infrared light (A 88) and tally lamp (A 40), the handle unit must be correctly attached to the camcorder.
1 Align the handle unit with the handle attachment unit and
then slide the handle unit forward until it is in place.
2 Firmly tighten the front and rear screws.
• To tighten the rear screws you can use a coin or similar object.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xf405Xf4005

Table of Contents