Canon opture 10 Instruction Manual page 74

CARD CAMERA.
a
The red-eye reduction mode cannot be used in stitch assist mode.
a
The flash cannot be used in Night and Super Night (OPTURA20) mode.
a
The flash will not fire in the following cases:
- When you press the EXP button in [AUTO
~A]
or [RED-EYE@] mode.
- When a shutter speed of 1/2000 or faster is set in CAMERA mode (the flash
mark appears in purple). However, if [FLASH ON
~
] is selected, the display
of the selected 5hutter speed flashes in purple for 4 seconds and the shutter
speed becomes set to 1/1000; the flash fi res.
- When an abnormality occurs during charging (the flash mark flashes in red).
- When the multi-image screen is selected or when you are recording movies
onto a tape (no flash mark appears).
- When the flash mark does not appear in green when you press the PHOTO
button. Set it to [FLASH ON
~
] if necessary.
a
When the flash is fired with an accessory such as an optional tele-converter
attached to the camcorder, its shadow may be recorded.
a
An image recorded with flash may flicker when played back on a different
device.
CA.MERA
1J~lDQJ1;u:"2)LiJ1e~~J;)J49.J;lL~~Qiifu~gJltr~~~c;;J;ir~4L'ik"lU*"="'"~"i'm!'l;;;'~ l
I
-
1. Set the camcorder to
CAMERA
or CARD
CAMERA
mode.
2. Set the video flash light's
POWER
switch to
SAUTO
or
«:JON.
• r!J
(Connection) appears.
• ON: The video light stays on.
• AUTO: The video light turns on and off automatically.
a
Do not touch or place flammable material or plastic close to the lamp or the
surrounding parts during or immediately after use; they become very hot.
a
Do not look directly at the lamp while the video light is on.
74