Canon opture 10 Instruction Manual page 122

-
Printing with the Direct Print Function ~.
You can print still images by connecting the camcorder to a printer with Direct Print
function. The Direct Print function can also be used with the print order settings
(OJ
120).
o
Observe the following precautions during printing, otherwise printing may not
be performed correctly.
- Do not turn off the camcorder or the printer.
- Do not change the position of the TAPE/CARD switch.
- Do not detach the cable.
- Do not remove the memory card.
o
Still images not recorded with this camcorder may not be printed correctly on a
printer with direct print function.
o
The direct print function is supported by Canon Card Photo Printers with the
~
logo and Canon Bubble Jet Printers with the
tJ
logo.
o
Refer to the instruction manual of each printer for information on which
interface cable to use with the camcorder.
The Card Photo Printers CP-1 0 and CP-1 00 are supplied with two direct
interface cables. Use the cable with the USB logo on the connector (DIF-1 00).
o
We recommend powering the camcorder from a household power source.
o
Refer also to the instruction manual of the respective printer.
o
The screenshots in this section are examples taken from a printer with direct
print function. Options for the [Style] category will differ slightly depending on
the printer.
Printer with
direct print function
1. Turn off the camcorder and insert a memory card that contains still images.
122
2. Connect a power source to the printer and turn on the printer.