Canon opture 10 Instruction Manual page 146

-
- c
:!
.2
0 ....
. - lU
:!::
IE
"tJ ..
"tJ 0
<-
.E
146
pire
rt
Print Related Messages
Message Explanation
No Paper Paper cassette is not correctly inserted or is out of paper.
Paper Jam The paper jammed during printing.
No Ink.
The ink cartridge is not inserted or is out of ink.
Ink Cassette Error There is a problem with the ink cassette.
Recharge the printer
The printer battery is depleted.
battery
Communication Error The printer is experiencing a data transmission error.
Could not print X You attempted to use the print order settings to print X
images
images that were made with another camcorder, have a
different format or were edited on a computer.
Cannot Print! You attempted to print an image that was made with
another camcorder, has a different format, or was edited on
a computer.
Set print order You attempted to print an image' from the CARD PLAY (VCR)
menu
[~",
PRINT] without havingset the print order.
Cannot trim You attempted to trim an image with an image size of
160 x120.
Readjust trimming You changed the print style after you set the trimming
settings.
Paper has been
Paper size has been changed between print setting and start
changed
of printing.
Incompatible paper
You attempted to print on paper that cannot be used with
size
the camcorder.
Paper and ink do not The ink cannot be used with the selected paper type.
match
Printer in use The printer is printing from a computer or a memory card
inserted into the printer. It automatically starts printing
from the camcorder when current prints are complete.
Printer warming up Printer is warming up. The printer automatically starts
printing when it is ready.
No printhead No print head is installed in the printer.
Printer cover open Printer cover is open. Close the printer cover securely.
Media type error Wrong paper. Cancel printing and set the paper you chose in
the print settings menu.
Paper lever error Paper lever error occurred. Adjust the paper selection lever
to the proper position.
Low ink level The ink tank needs to be replaced soon. Prepare a new ink
tank. If you select [Continue] in the error screen, you can
restart printing.
Waste tank full Waste tank is full. You can restart printing by pressing the
RESUME/CANCEL button on the Bubble Jet Printer. Request
replacement of the waste tank at the shop where you
purchased the printer or the nearest Canon customer
support center listed in the Bubble Jet Quick Start Guide.
Printer error Turn off the printer and turn it back on. If the error persists,
consult the nearest Canon customer support center listed in
the Bubble Jet Quick Start Guide.