Rename, Share, Or Unpair A Paired Device; About Serial And Usb Communications; Usb Troubleshooting; How To Share Your Mobile Data Connection - Honeywell ScanPal EDA51 Series User Manual

Rename, Share, or Unpair a Paired Device

You can rename a paired device to make it easier to identify on the list or unpair the
device to remove it from the paired list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Take one of the following actions:

About Serial and USB Communications

You can use these EDA51 accessories to transmit data to and receive data from
another device through serial or USB communications:
•
•
•

USB Troubleshooting

•
•

How to Share Your Mobile Data Connection

You can share the mobile data connection through USB tethering or Bluetooth
tethering. You can also use the computer as a Wi-Fi hotspot to share the
connection with other devices.
66
> Connected devices > Bluetooth.
next to the paired device.
• To rename the device, type the new name, and then tap OK.
• To allow Internet connection sharing or Contact Sharing, tap the check box
next to the setting.
• To unpair the device, tap Forget.
Home Base
USB snap-on adapter
USB cable
If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
driver is part of the Honeywell_Mobility SDK_Android software.zip file. To learn
where to get the software, see
Check to make sure you have enabled the USB for file transfer. To learn more, see
Configure USB Connection and Transfer Files
Developer Information
on page 18.
on page 68.
EDA51 User Guide