Rename Or Unpair A Paired Device; About Serial And Usb Communications; Usb Troubleshooting - Honeywell Dolphin CT60 User Manual

Rename or Unpair a Paired Device

You can rename a paired device to make it easier to identify on the list or unpair the
device to remove it from the paired list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Take one of the following actions:

About Serial and USB Communications

You can use these Dolphin CT50 series accessories to transmit data to and receive
data from another device through serial or USB communications:
•
•
•
•
•
For information on these accessories, contact your local sales representative.

USB Troubleshooting

•
•
68
• Tap Show received files to view statistics on the received files.
> Bluetooth.
next to the paired device.
• To rename the device, type the new name, and then tap OK.
To allow Internet connection sharing or Contact Sharing, tap the check box
•
next to the setting.
• To unpair the device, tap Forget.
Vehicle dock
HomeBase
Ethernet HomeBase
USB snap-on adapter
RS-232 DEX adapter
If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
driver is part of the Honeywell_Mobility SDK_Android software.zip file. To learn
where to get the software, see
Check to make sure you have enabled the USB for file transfer. To learn more, see
Configure USB Connection and Transfer Files
Developer Information
on page 18.
Dolphin CT60 Mobile Computer
on page 70.