Speeddial/Conf - Aastra 6735i User Manual

16. In the "Line" field, select the line for which you want to use the key functionality.
Valid values are:
• global
• 1 through 9
17. Click Save Settings.

Speeddial/Conf

The 6735i allows you to configure a softkey or programmable key or expansion module key to be used as a speed dial con-
ference key (Speeddial/Conf key) while remaining in the current call. This key allows a user on a call to conference another
party at a pre-defined number while remaining in the call.
For example, while on an active call, a user can use the Speeddial/Conf key to dial a recording service and have the result-
ing conference recorded.
Note:
If currently in a conference, the Speeddial/Conf key is disabled on the active call.
If you configure a softkey or programmable key or expansion module key as a Speeddial/Conf key and you press this key
while on an active call, the focused line changes to the dialing line. A Cancel softkey displays on the phone allowing you to
abort the conference speed dial if required. The message "Ringing..." displays below the number when the far end is ring-
ing. The message "Conf. Unavailable" briefly displays when a conference is already in progress. The active call is not put on
hold when the speed dial number is dialed.
Note:
This feature is not compatible with centralized conferencing.
Configuring a Speeddial/Conf Key
Aastra Web UI
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Programmable Keys.
or
Click on Operation->Expansion Module <N>.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Speeddial/Conf.
4. In the "Label" field, enter a label for the Speeddial/Conf key.
41-001451-05 REV01 – 04.2014
Line Keys, Programmable Keys, and Softkeys
87