Switch Ui Focus To Ringing Line - Aastra 6735i User Manual

Additional Features

Switch UI Focus to Ringing Line

You can configure a feature on the 6735i that controls the behavior of the phone when it receives an incoming call when
it is already in a connected call. When a call comes into the phone, and the phone is already on a connected call, the
phone switches focus to the ringing line to enable the user to see who is calling them. You can turn off this functionality
so that the phone stays focused on the connected call. You can do this using the Switch Focus to Ringing Line parameter
in the Aastra Web UI.
Configuring "Switch Focus to Ringing Line" Using the Aastra Web UI
Aastra Web UI
Use the following procedure to enable or disable the "Switch Focus to Ringing Line" using the Aastra Web UI.
Note:
"Switch Focus to Ringing Line" is enabled by default.
1. Click on Basic Settings->Preferences->General.
2. The "Switch Focus to Ringing Line" field is enabled by default. To disable this field, uncheck the box.
3. Click Save Settings to save your settings.
162
41-001451-05 REV01 – 04.2014