Aastra 6735i User Manual page 109

5. In the "Value" field, enter a multicast IP address and a port number for the Paging key. When you press this key, the
phone initiates an outgoing multicast RTP session to the specified address using the specified port. (For example,
239.0.1.15:10000).
Notes:
• When you select Paging for the "Type" field, the "Line" field is disabled.
• The "Value" field allows for one multicast address entry only.
• The valid port range is from 1 to 65535.
6. To receive RTP steams for Group Paging, you must also configure the "Paging Listen Addresses" parameter at the
path, Basic Settings->Preferences->Group Paging RTP Settings. For more information about setting this parameter,
see "Group RTP Paging (receives RTP streams)"
Programmable Keys
7. Select from "Key 1" through "Key 6".
8. In the "Type" field, select Paging.
9. In the "Value" field, enter a multicast IP address and a port number for the Paging key. When you press this key, the
phone initiates an outgoing multicast RTP session to the specified address using the specified port. (For example,
239.0.1.15:10000).
Notes:
• When you select Paging for the "Type" field, the "Line" field is disabled.
• The "Value" field allows for one multicast address entry only.
• The valid port range is from 1 to 65535.
10. To receive RTP steams for Group Paging, you must also configure the "Paging Listen Addresses" parameter at the
path, Basic Settings->Preferences->Group Paging RTP Settings. For more information about setting this parameter,
see "Group RTP Paging (receives RTP streams)"
Expansion Module Keys
11. Select from "Key 1" through "Key 36" (M670i).
or
Select from "Key 1" through "Key 60" (M675i).
12. In the "Type" field, select Paging.
13. (M675i) In the "Label" field, enter a label to apply to this key.
14. In the "Value" field, enter a multicast IP address and a port number for the Paging key. When you press this key,
the phone initiates an outgoing multicast RTP session to the specified address using the specified port. (For example,
239.0.1.15:10000).
Notes:
• When you select Paging for the "Type" field, the "Line" field is disabled.
• The "Value" field allows for one multicast address entry only.
• The valid port range is from 1 to 65535.
15.To receive RTP steams for Group Paging, you must also configure the "Paging Listen Addresses" parameter at the
path, Basic Settings->Preferences->Group Paging RTP Settings. For more information about setting this parameter,
see "Group RTP Paging (receives RTP streams)"
16. Click Save Settings to save your changes
41-001451-05 REV01 – 04.2014
Line Keys, Programmable Keys, and Softkeys
on page 172.
on page 172.
on page 172.
103